![]() The F2000 has an optional bayonet lug mounted near the muzzle, and an adjustable gas regulator with two settings: "normal" for standard ammunition meeting NATO specifications, and "adverse", used to send an increased volume of gas into the system to ensure proper functioning when fouled or when using low-pressure ammunition. The barrel also features a flash suppressor with an angled cut at the tip which directs the muzzle blast upward, compensating for muzzle rise. The rifle's chromed hammer-forged steel barrel is stated to retain accuracy after 20,000 normal (non-sustained) rounds. The sight cover and sight module can be quickly removed to reveal the Picatinny rail. ![]() The weapon's primary sight is a telescopic sight with a fixed 1.6× magnification (the reticle also enables use in low-light conditions) contained in a plastic housing above the receiver (mounted on the MIL-STD-1913 rail), the secondary sight is a non-adjustable fixed notch and front blade, molded into the optical sight housing cover. There are no access points for the possible ingress of dirt or debris the cocking handle slot is sealed. The cocking handle is placed on the left side of the receiver, just above the handguard, and can be operated by left-handed shooters. The rifle does not have a hold-open device the bolt does not stay back after the last round is fired. ![]() The magazine needs to be pulled out manually. The F2000 is not configured from the factory to have a drop-free magazine system due to the friction from the removable dust gaskets. The magazine catch/release button is installed symmetrically in the pistol grip, in front of the magazine the magazine catch is operated by an oversized actuator useful when wearing NBC gloves. The F2000 is fed from standard NATO box magazines (STANAG 4179) with a 30-round cartridge capacity using 5.56×45mm ammunition. The shell of the rifle is made of composite materials. The hammers, group pins, and springs are steel while all other components are nylon injection molding. F2000 GL1 AIRSOFT MANUALThe fire selector doubles as the weapon's manual safety and secures the firearm against accidental discharge (the selector/safety disc has 3 settings: "S" safe, "1" semi-automatic mode, "A" fully automatic fire). Both the safety system and trigger mechanism were adopted from the P90 personal defense weapon the selector toggle is a rotating disc located below the trigger. The F2000 is a gas-operated, fully automatic and ambidextrous bullpup rifle. A removable handguard is installed in front of the trigger which completes and encloses the trigger guard. The frame or lower receiver contains the trigger group, the bolt and bolt carrier assembly, return mechanism and magazine well. The barrel group has an integral MIL-STD-1913 Picatinny rail used to mount optical sights. The rifle consists of two main assemblies: the barreled receiver group and the frame, coupled together by means of an axis pin located above the trigger guard. The F2000 is a selective fire weapon operating from a closed bolt. The F2000 is a modular weapon system its principal component is a compact 5.56×45mm NATO-caliber assault rifle in a bullpup configuration. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |